4.9 · 512+ Reviews WETT & CSIA $5M Insured Same-Week
Installation Guide · 2026 · Cambridge

Cambridge Gutter & Downspout Installation Guide

TL;DR

For a typical Cambridge home (2,000–2,400 sq ft roof), install 5" K-style aluminum eavestrough at ¼" per 10 ft of pitch, with a 3"×4" downspout every 35 linear feet. Discharge 6 ft from the foundation. Total install runs $2,400–$4,800 with a 25-year workmanship warranty. Same-week booking across Cambridge.

Call (437) 475-3344

Sizing your gutter system

Gutter size is a drainage math problem, not a style choice. Multiply roof drainage area by the local 1-hour rainfall intensity (Toronto: ~40 mm/h). A 5" K-style aluminum gutter handles about 5,500 sq ft of roof; a 6" handles ~7,960. Any long steep roof plane over 1,000 sq ft or any valley dumping into a gutter is an automatic step-up to 6".

Downspouts: 2"×3" moves ~600 sq ft; 3"×4" moves ~1,200 sq ft. In Cambridge we default to 3"×4" — the cost delta is under $80 per drop and it eliminates 90% of overflow callbacks.

Materials and where they fail

  • Aluminum (.032"): Standard. 25-year lifespan. Fails at seams and hangers on long spans.
  • Aluminum (.027"): Builder-grade. Skip it — dents from a single ladder rest.
  • Steel: Rusts at cuts. Only for heritage restorations.
  • Copper: Lifetime, but 5–7× the cost. Used on Rosedale/Forest Hill heritage stock.
  • Vinyl: Do not use on any $Cambridge home — brittles below −20°C.

Code + install specs we hold to

  • Pitch: ¼" per 10 ft toward each downspout drop.
  • Hangers: hidden hex-head screws, 24" on centre (18" in snow country / north Cambridge).
  • Miters: hand-cut and sealed with tripolymer sealant, not butyl tape.
  • Downspouts strapped every 6 ft; discharge extensions minimum 6 ft from foundation.
  • Splash blocks or buried 4" ADS to daylight — never into the weeping tile.

Cambridge pricing (2026)

  • 5" K-style aluminum, installed: $12–$16 / linear ft
  • 6" K-style aluminum, installed: $16–$22 / linear ft
  • 3"×4" downspout with drop: $140–$220 each
  • Leaf guard (micro-mesh): $10–$14 / linear ft add-on
  • Tear-off + haul of existing: $2–$3 / linear ft

Neighborhood-by-neighborhood in Cambridge

Cambridge isn't uniform — tree cover, roof age, and lot slope drive different gutter specs across neighborhoods. Below: what we typically install in each.

Cambridge

Galt

  • Typical spec in Galt: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Galt, usually within 3–5 business days.
  • Full-property replacement in Galt typically takes 1 day, 2 techs.
Cambridge

Preston

  • Typical spec in Preston: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Preston, usually within 3–5 business days.
  • Full-property replacement in Preston typically takes 1 day, 2 techs.
Cambridge

Hespeler

  • Typical spec in Hespeler: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Hespeler, usually within 3–5 business days.
  • Full-property replacement in Hespeler typically takes 1 day, 2 techs.
Cambridge

West Galt

  • Typical spec in West Galt: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in West Galt, usually within 3–5 business days.
  • Full-property replacement in West Galt typically takes 1 day, 2 techs.
Cambridge

East Galt

  • Typical spec in East Galt: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in East Galt, usually within 3–5 business days.
  • Full-property replacement in East Galt typically takes 1 day, 2 techs.
Cambridge

Blair

  • Typical spec in Blair: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Blair, usually within 3–5 business days.
  • Full-property replacement in Blair typically takes 1 day, 2 techs.
Cambridge

Doon

  • Typical spec in Doon: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Doon, usually within 3–5 business days.
  • Full-property replacement in Doon typically takes 1 day, 2 techs.
Cambridge

Riverside

  • Typical spec in Riverside: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Riverside, usually within 3–5 business days.
  • Full-property replacement in Riverside typically takes 1 day, 2 techs.
Cambridge

Preston Heights

  • Typical spec in Preston Heights: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Preston Heights, usually within 3–5 business days.
  • Full-property replacement in Preston Heights typically takes 1 day, 2 techs.
Cambridge

Fiddlesticks

  • Typical spec in Fiddlesticks: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Fiddlesticks, usually within 3–5 business days.
  • Full-property replacement in Fiddlesticks typically takes 1 day, 2 techs.
Cambridge

Beaverdale

  • Typical spec in Beaverdale: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Beaverdale, usually within 3–5 business days.
  • Full-property replacement in Beaverdale typically takes 1 day, 2 techs.
Cambridge

Silver Heights

  • Typical spec in Silver Heights: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Silver Heights, usually within 3–5 business days.
  • Full-property replacement in Silver Heights typically takes 1 day, 2 techs.
Cambridge

Southwood

  • Typical spec in Southwood: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Southwood, usually within 3–5 business days.
  • Full-property replacement in Southwood typically takes 1 day, 2 techs.
Cambridge

Christopher Champlain

  • Typical spec in Christopher Champlain: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Christopher Champlain, usually within 3–5 business days.
  • Full-property replacement in Christopher Champlain typically takes 1 day, 2 techs.
Cambridge

Bridgeport

  • Typical spec in Bridgeport: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Bridgeport, usually within 3–5 business days.
  • Full-property replacement in Bridgeport typically takes 1 day, 2 techs.
Cambridge

Highland Park

  • Typical spec in Highland Park: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Highland Park, usually within 3–5 business days.
  • Full-property replacement in Highland Park typically takes 1 day, 2 techs.
Cambridge

Elgin Park

  • Typical spec in Elgin Park: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Elgin Park, usually within 3–5 business days.
  • Full-property replacement in Elgin Park typically takes 1 day, 2 techs.
Cambridge

Alison

  • Typical spec in Alison: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Alison, usually within 3–5 business days.
  • Full-property replacement in Alison typically takes 1 day, 2 techs.
Cambridge

Blackbridge

  • Typical spec in Blackbridge: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Blackbridge, usually within 3–5 business days.
  • Full-property replacement in Blackbridge typically takes 1 day, 2 techs.
Cambridge

Central Preston

  • Typical spec in Central Preston: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Central Preston, usually within 3–5 business days.
  • Full-property replacement in Central Preston typically takes 1 day, 2 techs.
Cambridge

Franklin

  • Typical spec in Franklin: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Franklin, usually within 3–5 business days.
  • Full-property replacement in Franklin typically takes 1 day, 2 techs.
Cambridge

Blair Road

  • Typical spec in Blair Road: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Blair Road, usually within 3–5 business days.
  • Full-property replacement in Blair Road typically takes 1 day, 2 techs.
Cambridge

Cambridge Centre

  • Typical spec in Cambridge Centre: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Cambridge Centre, usually within 3–5 business days.
  • Full-property replacement in Cambridge Centre typically takes 1 day, 2 techs.
Cambridge

Speedsville

  • Typical spec in Speedsville: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Speedsville, usually within 3–5 business days.
  • Full-property replacement in Speedsville typically takes 1 day, 2 techs.
Cambridge

Lang

  • Typical spec in Lang: 5" K-style aluminum, 3"×4" downspouts, micro-mesh guard.
  • Common upgrade: extend downspouts underground to daylight — Cambridge lots often slope back to the foundation.
  • Free on-site measure and estimate in Lang, usually within 3–5 business days.
  • Full-property replacement in Lang typically takes 1 day, 2 techs.

FAQ — Gutter Install Guide in Cambridge

Do I need a permit to replace gutters in Cambridge?+

No. Eavestrough replacement is maintenance under the Ontario Building Code — no permit required. New downspout discharge locations may need to comply with local stormwater bylaws.

Seamless vs sectional?+

Seamless every time on residential. We roll-form on-site to the exact wall length, cutting leak points by ~80%.

Are leaf guards worth it in Cambridge?+

Yes on any home under mature deciduous canopy (silver maple, oak). Micro-mesh systems pay for themselves in 3–5 years by eliminating twice-yearly cleanings.

Do you match colours?+

Yes — 30+ baked-enamel colours plus custom paint match for heritage properties.

Warranty?+

Materials: 25 years (manufacturer). Workmanship: 5 years, transferable to next owner.

Keep exploring

Related cities & services

Book now

Ready to book your chimney service?

Free written quotes. Same-week booking across the GTA.

(437) 475-3344
Free · 60 seconds

Quote in 3 quick taps.

Service · urgency · contact. A chimney expert replies in under 15 minutes.

  • Fixed-price written quote
  • No spam, no sales calls
  • WETT & CSIA certified
Call Text