Toronto Chimney Pros — GTA
4.9 · 512+ Reviews WETT & CSIA $5M Insured Same-Week
Fire-Risk Map · 2026 · Aurora

Aurora Dryer Vent Fire-Risk Map

TL;DR

In Aurora, three vent configurations account for the majority of dryer-related fires: (1) flex-foil transition ducts over 8 ft, (2) any run over 25 ft with more than two 90° elbows, and (3) rooftop terminations without a proper backdraft damper. Cleaning + code-legal rebuild runs $189–$650. Same-week booking across Aurora.

Call (437) 475-3344

Why Aurora homes are high-risk

Ontario Building Code 6.3.4 caps a dryer duct at 7.5 m equivalent length (each 90° elbow counts as 1.2 m). Most $Aurora townhouses and infill semis exceed that by design — the laundry is buried in a mid-house closet with a 30-ft run to the exterior wall. That's a lint trap by geometry.

Add flexible foil ("slinky") transition duct — technically illegal under CAN/CSA — and you get the exact setup behind ~2,900 dryer fires a year in North America (NFPA).

Warning signs (any one = book a service)

  • Clothes take more than one cycle to dry.
  • Dryer top or laundry room feels hotter than normal at end of cycle.
  • Burnt-lint smell during operation.
  • External vent hood flapper doesn't open, or lint visible on siding around it.
  • Last cleaning was over 12 months ago.

Aurora pricing (2026)

  • Standard clean (up to 15 ft, ground floor): $189
  • Long run / townhouse clean (up to 30 ft): $259–$329
  • Rooftop termination clean: $349–$459
  • Full code-legal rebuild (rigid smooth-wall, sealed joints): $650–$1,400
  • Booster fan install (runs over 25 ft): $450–$780

Our code-legal rebuild spec

  • Rigid galvanized 4" smooth-wall duct — no foil, no vinyl.
  • All joints sealed with UL-181 foil tape (not sheet metal screws — screws catch lint).
  • Minimum 45° elbows where possible; each 90° counted against total length.
  • Backdraft damper at termination, birds/rodent screen on hood only if code-approved (¼" mesh maximum).
  • End-user reset card left at the appliance with duct length and cleaning interval.

Neighborhood-by-neighborhood in Aurora

Different Aurora building types drive different vent failures. Below: risk profile and typical fix per neighborhood.

Aurora

Aurora Village

  • Dominant build type in Aurora Village: townhouse / semi — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Aurora Village: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Aurora Village; emergency (no dry / overheat) same-day.
Aurora

Aurora Heights

  • Dominant build type in Aurora Heights: townhouse / semi — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Aurora Heights: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Aurora Heights; emergency (no dry / overheat) same-day.
Aurora

Bayview Wellington

  • Dominant build type in Bayview Wellington: townhouse / semi — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Bayview Wellington: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Bayview Wellington; emergency (no dry / overheat) same-day.
Aurora

Bayview Northeast

  • Dominant build type in Bayview Northeast: modern infill 2-storey — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Bayview Northeast: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Bayview Northeast; emergency (no dry / overheat) same-day.
Aurora

Bayview Southeast

  • Dominant build type in Bayview Southeast: modern infill 2-storey — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Bayview Southeast: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Bayview Southeast; emergency (no dry / overheat) same-day.
Aurora

Aurora Estates

  • Dominant build type in Aurora Estates: modern infill 2-storey — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Aurora Estates: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Aurora Estates; emergency (no dry / overheat) same-day.
Aurora

Regency Acres

  • Dominant build type in Regency Acres: modern infill 2-storey — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Regency Acres: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Regency Acres; emergency (no dry / overheat) same-day.
Aurora

Hills of St Andrews

  • Dominant build type in Hills of St Andrews: 1½-storey detached — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Hills of St Andrews: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Hills of St Andrews; emergency (no dry / overheat) same-day.
Aurora

Rural Aurora

  • Dominant build type in Rural Aurora: 1½-storey detached — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Rural Aurora: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Rural Aurora; emergency (no dry / overheat) same-day.
Aurora

Aurora Grove

  • Dominant build type in Aurora Grove: post-war bungalow — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Aurora Grove: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Aurora Grove; emergency (no dry / overheat) same-day.
Aurora

Aurora Highlands

  • Dominant build type in Aurora Highlands: 1½-storey detached — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Aurora Highlands: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Aurora Highlands; emergency (no dry / overheat) same-day.
Aurora

Kennedy Street West

  • Dominant build type in Kennedy Street West: 1½-storey detached — average vent run 18–32 ft.
  • Most common failure: flex-foil transition + over-length rigid, no booster fan.
  • Typical service in Kennedy Street West: full clean + rebuild first 6 ft in rigid smooth-wall.
  • Same-week booking across Kennedy Street West; emergency (no dry / overheat) same-day.

FAQ — Dryer Vent Risk in Aurora

How often should I clean my dryer vent in Aurora?+

Annually for single-family homes, every 6 months for townhouses with long runs, and every 3 months for shared-stack condo buildings.

Can I DIY this?+

You can vacuum the lint trap housing safely. Full duct cleaning requires a rotary brush kit and access to the roof or exterior termination — not a homeowner job in most Aurora configurations.

Do you handle rooftop terminations?+

Yes — fully insured, safety-tied, WSIB-covered. Rooftop cleans are our specialty on Aurora townhouses and infill homes.

Will my landlord/condo cover this?+

In-suite vents are almost always tenant/owner responsibility. Vertical stacks in condo buildings are common-element and covered by the condo corporation.

Related pages

Gutter install — AuroraWinter roof prep — AuroraIce dam risk — AuroraAreas we cover — Aurora
Keep exploring

Related cities & services

Book now

Ready to book your chimney service?

Free written quotes. Same-week booking across the GTA.

(437) 475-3344
Free · 60 seconds

Quote in 3 quick taps.

Service · urgency · contact. A chimney expert replies in under 15 minutes.

  • Fixed-price written quote
  • No spam, no sales calls
  • WETT & CSIA certified
Call Text